Dimensional Drawings

Click on a category below to see what drawings (pdf) are currently available online. For products not listed here, contact us and we'll be glad to provide you with the information you need.

Fittings Valco • Cheminert
Valves Valco • Cheminert • Miscellaneous • Accessories
Actuators Electric • Air • Accessories
Additional
products 		 
Syringes • Gas purifiers • Flow/pressure controllers
Valco fittings Rev
Nuts and ferrules Internal nuts 8/31/06
Ferrules 6/10/10
Internal reducing ferrules 5/3/10
External nuts, stainless 12/20/05
External nuts, polymeric 12/20/05
Plugs and caps Plugs, standard and high pressure 5/14/09
Caps 1/7/13
Tees and crosses Tees, general 12/15/05
Tee, 1/32" stainless 8/28/15
Crosses 12/19/05
Microvolume tee, metal 9/15/06
Microvolume tee, polymeric 9/15/06
Post column reaction tee 4/27/12
Post column reaction tee, 1/16" to 1/32" 5/1/12
Manifolds 1/16" 7/15/19
1/8" 4/19/06
Manifold pipe adapters 5/1/06
Unions Internal, standard 12/14/05
Internal, bulkhead 1/15/09
External, standard and bulkhead 1/16/09
External/internal, standard and bulkhead 1/19/09
1/32" External, low mass 3/08/06
Reducing unions Internal, standard 3/27/06
Internal, bulkhead 1/20/09
External, standard and bulkhead 1/15/09
External/internal, bulkhead 1/19/09
Internal/external 12/15/05
Internal/external, 1/16" to 1/32" 1/20/09
Column end fittings External 1/21/08
Internal 2/11/08
Post column reaction tee 4/27/12
Post column reaction tee, 1/16" to 1/32" 5/1/12
Precolumn system, 1/4" x 2 cm 3/23/10
Precolumn system, 1/4" x 5 cm 3/23/10
Filters Bulkhead, removable screen 1/20/09
Standard, removable frit or screen 9/7/06
Adapters Internal reducers, 1/16" - 1/4" 5/12/05
Internal reducers, 1/16" or 1/32" to 360 micron 10/8/12
Pipe, male and female, to ZDV 1/9/06
Pipe, male and female, to Valco external 9/19/07
Syringe adapters 6/10/10
Zero dead volume fill ports, 1/16" 4/9/10
True zero dead volume fill ports, 1/16" 4/8/10
Septum injector nut 1/22/10
1/8" external to O-ring seal, 10-32 or 5/16-24 thread 6/22/06
1/16" internal to O-ring seal, 10-32 thread 8/30/10
1/16" or 1/8" internal to O-ring seal, 5/16-24 thread 8/30/10
Fused silica adapters, one-piece, 1/16" 1/22/10
Top top
Cheminert fittings Rev
Nanovolume HPLC One piece nut/ferrule, 1/32" 1/5/06
One piece nut/ferrule, 360 micron, PEEK 4/10/06
One piece nut/ferrule, 360 micron, stainless 11/4/11
Plug, 360 micron, PEEK 9/17/07
Cap, 360 micron, PEEK 9/18/07
Union, 360 micron, PEEK 8/7/2014
Tee, 1/32" 2/17/11
Cross, 1/32" 2/17/11
Y, 1/32" 2/17/11
External union, 1/32" 4/23/12
Reducing union, 1/16" to 360 micron, stainless 9/17/07
Reducing union, 1/16" to 360 micron, PEEK 9/17/07
Reducing union, 1/32" to 360 micron, stainless 9/17/07
High pressure PEEK Nuts 12/15/05
One-piece "No-Twist" fittings 10/3/12
External nuts 12/20/05
Plugs 12/21/05
Caps 12/21/05
Tees, general 6/23/09
Tee, 1/32" polymeric 8/28/15
Crosses 6/23/09
Unions 6/23/09
Unions, bulkhead 1/21/09
Reducing unions 3/4/08
Reducing unions, bulkhead 6/23/09
Low pressure Flangeless fittings with collapsible ferrules 6/22/07
Tees 1/19/09
Mixing tee 5/8/15
Crosses 1/19/09
Union, 1/4-28 to 1/16" ZDV, stainless 2/19/08
Unions, 1/4-28 to 1/4-28 or 1/16" ZDV, bulkhead, stainless 1/21/09
Unions, 1/4-28 to 1/4-28, 1/16" ZDV, or 1/2-20, polymeric 2/20/08
Unions, 1/4-28 to 1/4-28 or 1/16" ZDV, bulkhead, polymeric 1/21/09
Manifold, 5 ports 1/19/09
Manifold, 9 ports 1/19/09
Adapter, female luer to 1/4-28 10/9/06
Adapter, female luer to 1/16" ZDV 7/30/08
Adapters, female luer to 1/4-28 or 1/16" ZDV, bulkhead 1/21/09
Adapter, male luer to 1/4-28 7/30/08
Adapters, 1/4-28 to 1/4" or 1/8" tube 7/30/08
Adapters, male or female pipe to male or female 1/4-28 6/4/09
Top top
Cheminert valves Rev
HPLC and
UHPLC 		Model C1CF - through-the-handle continuous flow injector 11/16/09
Model C1 - through-the-handle injector 10/2/15
Models C2, C5, C72, and C75 on universal actuator, closemount 11/11/09
Models C2 and C72 on microelectric actuator, closemount 3/29/07
Models C2 and C72 on microelectric actuator, with standoff 11/12/09
Models C2, C72, and C4 on air actuator, closemount 1/24/11
Models C2, C4, and C5, manual versions 4/29/13
Model C2 6 port, replacement valve 8/25/05
Model C2 8 or 10 port, replacement valve 9/2/05
Model C4, replacement valve 6/11/08
Models C5 and C75 on microelectric actuator, closemount 3/25/13
Models C5 and C75 on microelectric actuator, with standoff 3/25/13
Models C5 and C75 on air actuator, closemount 1/26/11
Model C5 on microelectric actuator, with dual drive gearbox, closemount 10/26/05
Model C5 on microelectric actuator, with dual drive gearbox, standoff 10/26/05
Model C72M with manual hardware 9/1/15
Low pressure Model C22(Z) on microelectric actuator, closemount 3/25/13
Model C25(Z) on universal actuator, closemount 3/31/16
Model C25(Z) on microelectric actuator, closemount 4/7/14
Model C25(Z) on microelectric actuator with right angle drive 12/7/06
Models C22(Z) and C25(Z) on air actuator, closemount 9/1/05
Models C22(Z) and C25(Z), manual versions 4/1/05
Model 25, manual version 3/6/14
Model C22(Z), replacement valve 7/18/12
Model C25(Z), replacement valve 5/9/12
Model C25G on microelectric actuator, closemount 5/8/13
Model C25G, replacement valve 5/8/13
Model C42 (obsolete) on microelectric actuator, closemount 10/23/09
Model C45 (obsolete) on microelectric actuator, closemount 9/30/05
Model C45R on microelectric actuator, closemount 12/30/14
Model C45R on universal actuator, closemount 9/28/15
OEM Model C62, low pressure integrated motor/injector, 1/4-28 fittings, 4 or 6 port 7/23/10
Model C62, low pressure integrated motor/injector, 1/4-28 fittings, 8 or 10 port 7/30/10
Model C62Z, low pressure integrated motor/injector, 1/16" ZDV, 6 port 7/30/10
Model C52 and C55, integrated motor/injector-selector, for HPLC 7/23/10
Top top
Miscellaneous valves Rev
Combo valves Condyne 5/16/12
Valco 1/8/09
Micro valves for LC and GC 8/25/08
Micrometering (needle) valves 1/16" ZDV fittings 10/26/07
1/16" x 18" tubes 10/29/07
Mininert valves For vials, threaded 12/9/10
For vials, crimp top 11/22/10
With standard tapers 11/23/10
With threads, in-line 11/23/10
With threads, termination 11/23/10
For syringes 11/23/10
On/off valves Standard temp 1/16", air actuated, 1" standoff 2/24/10
High temp 1/16", air actuated, 2" or 4" standoff 2/15/13
1/16", manual 10/14/14
Prime/purge valves Standard temp 1/16", manual 2/25/10
1/16", air actuated 2/24/10
High temp 1/16", manual 10/14/14
1/16", air actuated 5/22/12
1/8", air actuated 4/3/13
40,000 psi on/off valves 1/32" on/off 3/1/10
1/32" dual on/off 3/1/10
1/16" dual on/off 3/1/10
Top top
Valve accessories Rev
Position feedback for air actuated valves 4/7/09
Purge housing 1/28/13
Single valve heater blocks Standard 11/26/13
Low mass 11/26/13
For NW type valves 11/27/13
Top top
Electric actuators Rev
Microelectric Two position 3/25/13
Multiposition 3/25/13
Universal 3/25/13
Modular Universal 8/1/21
Top top
Syringes Rev
Magnum syringe 8/31/06
Mininert valves For vials, threaded 12/9/10
For vials, crimp top 11/22/10
With standard tapers 11/23/10
With threads, in-line 11/23/10
With threads, termination 11/23/10
For syringes 11/23/10
Top top
Gas purifiers Rev
Gas specific purifiers 4/12/10
Helium and nitrogen purifiers Standard 7/27/10
Miniature 9/20/07
Top top
Flow/pressure controllers Rev
Standard on/off valves with 1" standoff 2/24/10
With 2" or 4" standoff 2/15/13
40,000 psi on/off valves 1/32" on/off 3/1/10
1/32" dual on/off 3/1/10
1/16" dual on/off 3/1/10
Gas flow controllers Model 100 1/21/13
Model 202 1/18/13
Model 300 1/17/13
Micrometering (needle) valves 1/16" ZDV fittings 10/26/07
1/16" x 18" tubes 10/29/07
Combo valves Condyne 5/16/12
Valco 1/8/09
Combo pressure regulators 5/26/09
Pressure regulators 10/16/12
Top top

MORE INFORMATION

We also have many products available as STP files for importation into your project modeling software.