Standard Electric Actuators for Selectors (Multiposition Valves)

microelectic valve actuator
  • Position indication
  • Manual control or remote control via contact closures or TTL logic level signals
  • 110 VAC (non-CE)
  • No power demand on the chromatograph

Multiposition (selector) models work with any of our multiposition valves. The manual controller with LED display allows the user to step sequentially from one position to the next or to return to Position 1 (Home).

A data system with momentary contact closures can direct the step and home functions; 5 VDC negative true logic outputs provide direct position access. A 20-conductor interface cable permits the system to step the actuator sequentially, move the actuator directly to any position, and read the actual valve position.

The actuator's number of positions must be properly matched to the valve's. If you are converting a manual valve to electric actuation and have any doubts about which actuator and hardware you need, contact our technical staff for assistance.

Select an item below to view product numbers

110 VAC multiposition actuators

4 position
6 position
8 position
10 position
12 position
16 position

110 VAC multiposition standard electric actuators

4 position

Hardware Product No.
closemount E4
2" standoff E42
3" standoff E43
4" standoff E44
6" standoff E46
for use w/existing standoff E4S

110 VAC multiposition standard electric actuators

6 position

Hardware Product No.
closemount E6
2" standoff E62
3" standoff E63
4" standoff E64
6" standoff E66
for use w/existing standoff E6S

110 VAC multiposition standard electric actuators

8 position

Hardware Product No.
closemount E8
2" standoff E82
3" standoff E83
4" standoff E84
6" standoff E86
for use w/existing standoff E8S

110 VAC multiposition standard electric actuators

10 position

Hardware Product No.
closemount E10
2" standoff E102
3" standoff E103
4" standoff E104
6" standoff E106
for use w/existing standoff E10S

110 VAC multiposition standard electric actuators

12 position

Hardware Product No.
closemount E12
2" standoff E122
3" standoff E123
4" standoff E124
6" standoff E126
for use w/existing standoff E12S

110 VAC multiposition standard electric actuators

16 position

Hardware Product No.
closemount E16
2" standoff E162
3" standoff E163
4" standoff E164
6" standoff E166
for use w/existing standoff E16S

MORE INFORMATION

SEE ALSO

MOUNTING HARDWARE

In the product number tables on this page, an actuator can be specified with closemount hardware, with a standoff (2", 3", 4", or 6"), or with just the standoff mounting hardware, if your valve already has a standoff.

Valves which will be mounted in ovens require a standoff assembly, which locates the actuator out of the heated zone.