Standoff Assemblies for Microelectric Actuators

standoffs for microelectric actuators

Valves which will be installed in ovens or heated zones require a standoff assembly, which locates the actuator out of the heated zone and supports both the valve and the handle or actuator. The 5/8" outside diameter standoff tube extends through the oven wall and is secured by means of a clamp ring supplied with the assembly.

If you are converting an actuated valve from a closemount to a standoff application, order the appropriate clamp ring and two screws in addition to the standoff assembly.

The microelectric actuator for selectors uses a special standoff assembly which is keyed to both valve and actuator. The key guarantees proper alignment and positioning of the valve.

Standoff assemblies for microelectric actuators

Valve type Standoff length Product No.
Valco and Cheminert selectors
(keyed standoff)
2" 2SOAMMP
3" 3SOAMMP
4" 4SOAMMP
6" 6SOAMMP
Valco and Cheminert two position 1 or 2 mounting holes 2" 2SOA
3" 3SOA
4" 4SOA
6" 6SOA
No mounting holes 2" 2SOAMP
3" 3SOAMP
4" 4SOAMP
6" 6SOAMP

Clamp rings and screws for attaching standoffs to microelectric actuators

Valve type Description Product No.
Two position valves Clamp ring CR8
Screw (order 2) HWSC-SC8-8B
Selectors Clamp ring CR10
Screw (order 2) HWSC-SC8-8TDH

DRAWINGS

TECH TIPS

  • If you are converting an actuated valve from a closemount to a standoff application, the clamp ring and screws which secure the standoff to the actuator are not included in the standoff assembly. You must order the clamp ring and screws in addition to the standoff assembly.
  • If you need the actuator as well as the hardware, you can order the actuator complete with the appropriate mounting hardware. Select an actuator type from the navigation column on the left of the screen.