Integrated Motor/Analytical Injectors - N60, 1/16" fittings

5,000 psi
Analytical
Integrated
1/16" 0.40 mm
integrated motor/selector
Integrated motor/injectors with N60 SS stator and 1/16" SS fittings
close move

Model C52 injectors are integrated motor/valve assemblies designed specifically to be built into an OEM system. Control is simplified to require a single contact closure; the injector's position is determined by whether the closure is held high or low.

Valves include 1/16" stainless nuts and ferrules. Order sample loops separately.

Select the desired number of ports below to view product numbers:

4 port valves

6 port valves

8 port valves

10 port valves

5,000 psi
Analytical
Integrated
1/16" 0.40 mm
6 port schematic

4 port valves

Description Product No.
Valve w/integrated actuator C52-2004I
Valve w/integrated actuator, RS-232 version C52-2004IA
Valve w/integrated actuator, RS-485 version C52-2004IF
With motor/sensor only C52-2004I-S
Replacement rotor C2-20R4
Replacement stator C52-2C04
Top top
5,000 psi
Analytical
Integrated
1/16" 0.40 mm
6 port schematic

6 port valves

Description Product No.
Valve w/integrated actuator C52-2006I
Valve w/integrated actuator, RS-232 version C52-2006IA
Valve w/integrated actuator, RS-485 version C52-2006IF
With motor/sensor only C52-2006I-S
Replacement rotor C2-20R6
Replacement stator C52-2C06
Top top
5,000 psi
Analytical
Integrated
1/16" 0.40 mm
8 port schematic

8 port valves

Description Product No.
Valve w/integrated actuator C52-2008I
Valve w/integrated actuator, RS-232 version C52-2008IA
Valve w/integrated actuator, RS-485 version C52-2008IF
With motor/sensor only C52-2008I-S
Replacement rotor C2-20R8H
Replacement stator C52-2C08
Top top
5,000 psi
Analytical
Integrated
1/16" 0.40 mm
10 port schematic

10 port valves

Description Product No.
Valve w/integrated actuator C52-2000I
Valve w/integrated actuator, RS-232 version C52-2000IA
Valve w/integrated actuator, RS-485 version C52-2000IF
With motor/sensor only C52-2000I-S
Replacement rotor C2-20R0H
Replacement stator C52-2C00
Top top

SPECIFICATIONS

Max press: 5,000 psi liq
Max temp: 50°C
Stator: N60 stainless
Rotor: Valcon H

OPTIONS

Contact us for more info about:

  • Hastelloy C or titanium stator
  • 0.75 mm bore

MORE INFORMATION

SEE ALSO

CE NOTE

  • These products are defined by CE as "components", and are fully RoHS compliant and designed to pass all CE testing when properly installed in a CE compliant instrument. Some CE testing has been done. A copy of the results are available from our compliance officer upon request.