Trapping Flowpath Selectors - Low Pressure

ST selector flow schematic

ST selectors are used for multi-column, multi-sample, or multi-trap operations, and are available for use with 4 to 16 loops, or positions.

Low pressure ST selectors are made of Nitronic 60, with a rotor made of Valco E, a polyaryletherketone/PTFE composite. Valves are rated at 200 psi gas and 200°C.

Valves can be actuated manually or automated with pneumatic or electric actuators. GC valves usually require a standoff - an extension between the valve and actuator which allows the valve to be mounted in the heated zone while the actuator or handle remains outside at ambient temperature. Standoffs are available in lengths of 2", 3" 4", and 6".

Go to product number charts

(Click right column to select) Fitting size Bore
Trapping (ST) selectors 1/16" 0.75 mm
1/8" 1.0 mm