The technical notes listed below are currently available online. For TechNotes not listed here, contact us and we'll mail or fax a paper copy.
Subject categories
| Fittings | TN no. | Rev | |
|---|---|---|---|
| Cheminert fittings |
Cheminert connecting accessories
(Use of the flanging tool) How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing |
TN 502
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
3/01 |
|
Flangeless fittings with collapsible ferrule
Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules.
|
TN 505a
Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules.
|
10/03 | |
|
Nanovolume one-piece 1/32" fittings,
installation and use Cheminert nanovolume 1/32" |
TN 507
Cheminert nanovolume 1/32"
|
12/01 | |
|
Cheminert 360 micron fittings,
installation and use Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules. |
TN 509
Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules.
|
9/17 | |
|
360µm to 1/16" fitting (C360IZR1)
Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules.
|
TN 512
Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules.
|
10/18 | |
| Valco fittings |
EZR and IZR installation instructions
Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules.
|
TN 504
Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules.
|
6/14 |
|
Fused silica adapters,
installation and use
Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules.
|
TN 501
Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules.
|
10/07 | |
|
IZERA1.5 installation instructions
Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules.
|
TN 506
Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules.
|
9/00 | |
|
Zero dead volume (ZDV) fitting instructions
Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules.
|
TN 503
Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules.
|
11/06 | |
|
Zero dead volume fill port fittings
Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules.
|
TN 510
Instructions for installing Cheminert flangeless fittings with CTFE or PEEK one-piece collapsible ferrules.
|
9/12 | |
Subject categories
| Fused Silica Tube Preparation | TN no. | Rev |
|---|---|---|
|
Lapping the ends of fused silica tubing
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 621
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
6/18 |
Subject categories
| TN no. | Rev | |
|---|---|---|
|
Cleaning or Replacing a Pulsed Discharge Detector Ground Pin
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 620
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/18 |
Subject categories
| Purge housing | TN no. | Rev |
|---|---|---|
|
Two position and multiposition valves
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 602
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
4/06 |
Subject categories
| TGA 5000 | TN no. | Rev |
|---|---|---|
|
Technical description
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 611
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
2/08 |
Subject categories
| Heated valve enclosures | TN no. | Rev |
|---|---|---|
|
Installing a valve
(single valve model)
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 601
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/00 |
|
Installing a valve
(two or three valve model)
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 604
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
4/01 |
Subject categories
| Flow controllers | TN no. | Rev |
|---|---|---|
|
Model 100
upstream-referenced fixed span flow controller
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 613
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
1/11 |
|
Model 202
upstream-referenced adjustable span flow controller
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 614
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
11/17 |
|
Model 300
downstream-referenced fixed span flow controller
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 615
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
1/11 |
|
Dial mounting instructions (from the dial manufacturer's site)
Also includes dimensional drawings
|
-- |
Subject categories
| VCom software | TN no. | Rev |
|---|---|---|
|
User guide
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 618
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
7/12 |
Subject categories
| Cheminert valves | TN no. | Rev | ||
|---|---|---|---|---|
| General information |
Cheminert UHPLC Valves and Selectors
Notice of design change How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing |
TN 827
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
7/15 | |
| Cleaning and rotor replacement |
Cheminert HPLC and UHPLC injectors
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 801
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
12/14 | |
|
Nanovolume® models CN2 and CN4
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 813
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
12/14 | ||
|
Models C22, C24, C25, C22Z, C24Z, and C25Z
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 811
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
12/14 | ||
|
Models C35Z and C45 (obsolete)
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 816
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
12/01 | ||
|
Model C42R
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 828
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
2/16 | ||
|
Model C45R
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 826
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
1/15 | ||
| Installation, use, and maintenance |
Models C1 and C1CF
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 802
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
6/15 | |
|
Model C25G
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 824
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
1/15 | ||
|
Models C52, C62, and C62Z
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 819
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
8/18 | ||
|
Models C55, C65, and C65Z
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 821
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
8/18 | ||
|
Selectors, air- and
electrically-actuated
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 814
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
4/14 | ||
|
Loop fill port assembly
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 806
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/00 | ||
| Flow diagrams |
4 port |
Internal sample (fixed volume) injector
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 807
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
11/07 |
|
Switching valve
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 803
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
11/07 | ||
| 6 port |
External volume sample injector
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 808
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
8/11 | |
|
Model C3 external volume sample injector
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 808b
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 | ||
|
Model C6 continuous flow injector
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 820
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
12/18 | ||
| 8 port |
External volume sample injector
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 809
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
11/07 | |
| 10 port |
External switching valve
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 810
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
11/07 | |
| Stream selector |
Model C5F
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 815
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
7/13 | |
|
Model C35ZF
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 822
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/09 | ||
|
Model C35ZT
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 823
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/09 | ||
Subject categories
| Diaphragm valves | TN no. | Rev | |
|---|---|---|---|
| Operation instructions |
Models DV-12 and DV-22
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 605
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/16 |
| Diaphragm replacement |
Models DV-12 and DV-22
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 606
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/12 |
Subject categories
| Valco valves | TN no. | Rev | |||
|---|---|---|---|---|---|
| General information |
Installing a loop
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 105
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/00 | ||
|
Installing a microvolume loop
(20 µl or less)
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 104
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/00 | |||
|
Internally purged valves
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 107
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/13 | |||
| Two position |
Operating notes and
cleaning instructions
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 201
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
12/18 | ||
|
Valve alignment troubleshooting
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 101
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
2/10 | |||
|
Mounting 10 port W valves
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 103
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
12/09 | |||
|
Manual feedback assembly – W valves
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 106
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
7/13 | |||
|
Dual internal volume injector
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 208
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/00 | |||
| Flow diagrams |
3 port |
Switching valve
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 207
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 | |
| 4 port |
Internal volume sample injector
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 202
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 | ||
|
Switching valve
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 206
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 | |||
| 6 port |
External volume sample injector
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 203
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 | ||
| 8 port |
External volume sample injector
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 204
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 | ||
| 10 port |
Multifunctional valve
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 205
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 | ||
| Selectors | Flow diagrams |
Dead-end Flowpath:
SD configuration How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing |
TN 710
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/15 | |
|
Common Outlet Flowpath:
SC configuration How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing |
TN 711
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/15 | |||
|
Flow-through Flowpath:
SF configuration How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing |
TN 712
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/15 | |||
|
Trapping Flowpath:
ST configuration How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing |
TN 713
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/15 | |||
|
Trapping/Flow-through Flowpath:
STF configuration How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing |
TN 714
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/15 | |||
| Cleaning, rotor replacement, and alignment instructions |
UW and MW valves on microelectric and universal actuators (keyed hardware)
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 715
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
7/17 | ||
| Alignment instructions for selector valves with legacy unkeyed mounting hardware |
MW valves on air actuators
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 707
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
12/00 | ||
|
MW valves on standard electric actuators
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 708
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
7/17 | |||
|
UW valves on air actuators
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 705
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
12/00 | |||
|
UW valves on standard electrical actuators
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 706
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
7/17 | |||
| Cleaning and rotor replacement |
High temperature valves
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 704
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
4/17 | ||
|
Low temperature valves
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 703
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
4/17 | |||
|
Actuator considerations
for Valco column selectors CST4UW and CST6UW valves
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 709
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
7/05 | |||
Subject categories
| Older Valco valves with visible coil spring | TN no. | Rev | |
|---|---|---|---|
| Operation notes and cleaning instructions |
P and E Series valves
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 304
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 |
|
P and E Series VL type valves
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 310
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 | |
|
T Series valves
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 305
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 | |
| Operation notes and cleaning and alignment instructions, multiposition valves |
High temperature valves
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 704
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
4/17 |
|
Low temperature valves
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 703
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
4/17 | |
| Flow diagrams |
3 port switching valve
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 307
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 |
|
4 port internal sample injector
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 301
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 | |
|
4 port switching valve
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 306
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 | |
|
6 port sample injector
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 302
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 | |
|
8 port switching valve
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 303
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 | |
|
10 port multifunctional valve
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 308
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 | |
|
10 port internal sample injector
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 309
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/00 | |
Subject categories
| Micrometering (needle) valves | TN no. | Rev |
|---|---|---|
|
Mounting instructions
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 603
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
5/18 |
Subject categories
| Standard on-off and prime-purge valves | TN no. | Rev | |
|---|---|---|---|
| On-off valves |
Air actuated, installation and use
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 607
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
6/14 |
|
Manually operated, installation and use
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 609
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
7/14 | |
| Prime-purge valves |
Air actuated, installation and use
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 608
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
7/14 |
|
Manually operated, installation and use
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 610
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
11/03 | |
| 40K psi on-off and prime-purge valves | TN no. | Rev | |
|---|---|---|---|
| On-off valves |
Installation and use
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 616
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
12/11 |
Subject categories
| Valve actuation | TN no. | Rev | ||
|---|---|---|---|---|
| Air actuators | Two position |
Implementation - older solenoids
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 405
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
7/18 |
|
Implementation - current solenoids
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 425
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
7/18 | ||
|
O-ring replacement
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 409
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
5/11 | ||
|
Digital Valve Interface (DVI)
implementaion
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 411
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/04 | ||
|
High Speed Switching Accessory (HSSA)
implementation
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 412
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
1/00 | ||
|
Position Feedback (PFAF)
implementation
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 419
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
6/08 | ||
| Multiposition |
Implementation - older solenoids
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 406
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
7/18 | |
|
Implementation - current solenoids
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 426
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
7/18 | ||
|
O-ring replacement
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 410
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
5/11 | ||
|
Multiposition air actuator position indicator switch
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 430
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
5/18 | ||
| Universal actuator |
Models EUH, EUD, and EUT
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
Manual
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
8/18 | |
|
USB tutorial part 1: Downloading the USB drivers
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 420-1
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
3/11 | ||
|
USB tutorial part 2: Installing the USB drivers
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 420-2
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
3/11 | ||
|
USB tutorial part 3: Verifying actuator communication
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 420-3
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
3/11 | ||
|
Universal Actuator and Power Supply Assembly
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 427.R1
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
11/13 | ||
|
Using Valco Electric Actuators with Sciex Analyst® Software
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 428
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
6/16 | ||
|
Setting a Universal Actuator for Operation in Legacy Mode
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 429
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
6/16 | ||
| Microelectric actuators |
Two position |
EM2C controller, installation and use (EM2C controller was obsoleted in 2010; newer models refer to TN 421)
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 413
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
8/18 |
|
E2CA controller, installation and use
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 421
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
8/18 | ||
|
EM2C, forced initialization procedure
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 413a
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
5/05 | ||
|
Using Valco Electric Actuators with Sciex Analyst® Software
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 428
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
6/16 | ||
| Multiposition |
Installation and use
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 415
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
8/18 | |
|
Quick start guide
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 415QS
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/14 | ||
|
Change Summary: Multiposition microelectric actuator controller
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 434
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
12/18 | ||
| Standard electric actuators |
Two position |
Installation and use
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 417
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
11/00 |
|
Modifications (*now in the manual)
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 408*
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/10 | ||
| Multiposition |
Installation and use
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 418
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
8/07 | |
|
Modifications (*now in the manual)
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 407*
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
1/06 | ||
|
Models E-VI
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 432
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
10/18 | ||
| Closemount hardware |
For air or electric actuators
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 403
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
2/10 | |
|
Manual actuation assembly for two position W and UW valves
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 401
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/00 | ||
|
Installing a Cheminert Selector on a Clamp Ring
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 422
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/10 | ||
| Standoff assemblies |
For air or electric actuators
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 404
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
3/03 | |
|
For manual actuation
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 402
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
12/18 | ||
| Clamp rings |
Descriptions and Applications
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 431
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/18 | |
|
Rheodyne adapter kit installation instructions
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
TN 416
How to use a flanging tool to install Cheminert tube end fittings on PTFE tubing
|
9/06 | ||
