- Original equipment in Agilient® Mass Spec and LC Mass Spec
- Reduce gas impurities from high PPM to low PPB levels
- Decrease baseline noise and increase GC/MS sensitivity
- Replace three traps with one purifier
Gas purification is critical to GC performance. Several types of contaminants are detrimental - notably moisture, hydrocarbons, and oxygen. VICI Metronics gas purifier modules are designed to be placed in-line with the GC carrier or detector gas supply to remove these contaminants from the analytical gases prior to their entering the GC.
Gas purification is optimized by a multiple bed format. Each bed functions at a
lower contaminant concentration, resulting in a series of contaminant concentration gradients across the length of the
gas purifier.
See illustration. 
VICI Metronics gas purifiers dramatically reduce contaminant levels and absorb a greater variety of contaminants
than other gas purification products. Advanced materials and design features guarantee that the modules will produce
gases that are at least a factor of ten higher than a 99.9999% "chromatography grade" cylinder of gas when the purifier
is supplied by a 99.995% cylinder.
See chart.
The cost difference between the two grades of gas will pay for the cost of the gas
purifier several times over during its operating life.
| Fitting size | Length | Product No. |
|---|---|---|
| 1/8" | 22.5" | P100-1* |
| 1/4" | 22.5" | P100-2 |