Cheminert fittings

INJECTORS, SELECTORS, AND VALVES (Which one do I need?)	ACTUATORS
Cheminert valves Nanovolume® UHPLC (≤ 20K psi) HPLC (≤ 5K psi) Low pressure OEM Sample loops	Valco valves GC HPLC (≤ 5K psi) Selectors Sample loops Diaphragm valves Valve accessories	Miscellaneous valves 40K psi Combo Diaphragm LC/GC micro Micrometering (needle) Mininert On/off and prime/purge	Microelectric Standard electric Air Universal Manual Mounting hardware Actuator cables Controllers/interfaces
FITTINGS	PRODUCTS FOR GC	LIQUID HANDLING	ADDITIONAL PRODUCTS
Cheminert fittings Valco fittings Filters Request a CATALOG	Columns Column heating unit for fast GC Detectors Gas purifiers HayeSep polymers Syringes Trace gas analyzers Accessories	40K psi injector system M Series pump Diluter/dispenser Hollow plunger syringes Spargers Syringes	Calibration gas standards (perm tubes) Calibration gas generators Emerging applications IMS explosive and narcotic dopants FIA accessories Flow/pressure controllers Gas monitors Gas purifiers Syringes and probes Tools Tubing

Cheminert fittings are ideally suited for applications requiring an inert, biocompatible, metal-free flowpath. Wetted materials are PFA, FEP, CTFE, or PEEK, and uniform flow passages minimize mixing. All connections have zero dead volume.
Nanovolume® HPLC fittings are available with 100 or 150µm (.004"-.006") bores. The minimal transfer volume contributed by these components makes them especially beneficial in applications with flow rates in the µl/min range.
High pressure PEEK fittings are rated at 5000 psi with fingertight nuts, well beyond the burst strength of most PEEK tubing. The taper angle and detail design conform to the industry standard established by the Valco line.
Low pressure fittings are ideally suited for applications requiring an inert, biocompatible, metal-free flowpath. Wetted materials are PFA, FEP, CTFE, or PEEK, and uniform flow passages minimize mixing. All connections have zero dead volume.