Standard Electric Actuators - Two Position

microelectic valve actuator
  • Position indication
  • Manual control or remote control via contact closures or TTL logic level signals
  • 24 VDC, CD-certified version as well as 110 VAC and 230 VAC
  • No power demand on the chromatograph
Product numbers for: 110 VAC models
24 VDC models (CE certified)

Two position standard electric actuators may be operated manually by a toggle switch or automatically by any data system with momentary contact closures or 5 VDC negative true logic outputs. A complete system, the actuator includes interface cable, power cord, and manual controller assembly with position indication. (For more information on control options, refer to Technical Note 417.)

The actuator's rotation must be properly matched to the valve's. If you are converting a manual valve to electric actuation and have any doubts about which actuator and hardware you need, contact our sales or technical staff for assistance.

110 VAC
Two position standard electric actuators

No. of ports Hardware Product No.
3 or 4
(90°) 		closemount E90
2" standoff E902
3" standoff E903
4" standoff E904
6" standoff E906
for use w/existing standoff E90S
6
(60°) 		closemount E60
2" standoff E602
3" standoff E603
4" standoff E604
6" standoff E606
for use w/existing standoff E60S
8
(45°) 		closemount E45
2" standoff E452
3" standoff E453
4" standoff E454
6" standoff E456
for use w/existing standoff E45S
10
(36°) 		closemount E36
2" standoff E362
3" standoff E363
4" standoff E364
6" standoff E366
for use w/existing standoff E36S
12
(30°) 		closemount E30
2" standoff E302
3" standoff E303
4" standoff E304
6" standoff E306
for use w/existing standoff E30S
Top top

24 VDC
Two position standard electric actuators

No. of ports Hardware Product No.
3 or 4
(90°) 		closemount E90-CE
2" standoff E902-CE
3" standoff E903-CE
4" standoff E904-CE
6" standoff E906-CE
for use w/existing standoff E90S-CE
6
(60°) 		closemount E60-CE
2" standoff E602-CE
3" standoff E603-CE
4" standoff E604-CE
6" standoff E606-CE
for use w/existing standoff E60S-CE
8
(45°) 		closemount E45-CE
2" standoff E452-CE
3" standoff E453-CE
4" standoff E454-CE
6" standoff E456-CE
for use w/existing standoff E45S-CE
10
(36°) 		closemount E36-CE
2" standoff E362-CE
3" standoff E363-CE
4" standoff E364-CE
6" standoff E366-CE
for use w/existing standoff E36S-CE
12
(30°) 		closemount E30-CE
2" standoff E302-CE
3" standoff E303-CE
4" standoff E304-CE
6" standoff E306-CE
for use w/existing standoff E30S-CE
Top top

MORE INFORMATION

SEE ALSO

MOUNTING HARDWARE

In the product number tables on this page, an actuator can be specified with closemount hardware, with a standoff (2", 3", 4", or 6"), or with just the standoff mounting hardware, if your valve already has a standoff.

Valves which will be mounted in ovens require a standoff assembly, which locates the actuator out of the heated zone.