GC Internal Sample Injectors - 1/32", 0.25 mm ports, .06 µl

A complete valve product number includes information about the valve, actuator, and mounting hardware, as reflected in the table below.

Valves include stainless steel nuts and ferrules.

Med temp
Internal sample
1/32" 0.25 mm
4 port schematic

.06 µl injectors

Manual version not available without standoff.
Standard electric actuator:
   110 VAC for USA
   110/230 VAC to 24 VDC power supply for international
Microelectric actuator: 24 VDC, with 110/230 VAC to 24 VDC power supply

Actuation Standoff Product No.
Manual 2" 2NI4WE.06
3" 3NI4WE.06
4" 4NI4WE.06
6" 6NI4WE.06
With air actuator none ANI4WE.06
2" A2NI4WE.06
3" A3NI4WE.06
4" A4NI4WE.06
6" A6NI4WE.06
With standard electric actuator none ENI4WE.06
2" E2NI4WE.06
3" E3NI4WE.06
4" E4NI4WE.06
6" E6NI4WE.06
With microelectric actuator none EPNI4WE.06
2" EP2NI4WE.06
3" EP3NI4WE.06
4" EP4NI4WE.06
6" EP6NI4WE.06
Replacement parts Product No.
Valve (for use with existing actuator) DNI4WE.06
Rotor SSANI4WE.06

SPECIFICATIONS

Max pressure: 1000 psi
Max temp: 175°C
Body: Nitronic 60
Rotor: Valcon E

OPTIONS

Contact us for more info about:

  • Non-standard valve body materials

MORE INFORMATION

STANDOFFS

GC valves usually require a standoff - an extension between the valve and actuator which allows the valve to be mounted in the heated zone while the actuator or handle remains outside at ambient temperature.