GC Internal Sample Injectors - 1/16", 0.75 mm ports, .5 µl

A complete valve product number includes information about the valve, actuator, and mounting hardware, as reflected in the table below.

Valves include stainless steel nuts and ferrules.

Med temp
Internal sample
1/16" 0.75 mm
4 port schematic

.5 µl injectors

Standard electric actuator:
   110 VAC for USA
   110/230 VAC to 24 VDC power supply for international
Microelectric actuator: 24 VDC, with 110/230 VAC to 24 VDC power supply

Actuation Standoff Product No.
Manual none CI4UWE.5
2" 2CI4UWE.5
3" 3CI4UWE.5
4" 4CI4UWE.5
6" 6CI4UWE.5
With air actuator none ACI4UWE.5
2" A2CI4UWE.5
3" A3CI4UWE.5
4" A4CI4UWE.5
6" A6CI4UWE.5
With standard electric actuator none ECI4UWE.5
2" E2CI4UWE.5
3" E3CI4UWE.5
4" E4CI4UWE.5
6" E6CI4UWE.5
With microelectric actuator none EDPCI4UWE.5
2" ED2CI4UWE.5
3" ED3CI4UWE.5
4" ED4CI4UWE.5
6" ED6CI4UWE.5
Replacement parts Product No.
Valve (for use with existing actuator) DCI4UWE.5
Rotor SSACI4UWE.5

SPECIFICATIONS

Max pressure: 1000 psi
Max temp: 175°C
Body: Nitronic 60
Rotor: Valcon E

OPTIONS

Contact us for more info about:

  • Non-standard valve body materials

MORE INFORMATION

STANDOFFS

GC valves usually require a standoff - an extension between the valve and actuator which allows the valve to be mounted in the heated zone while the actuator or handle remains outside at ambient temperature.