Pressed frit filters contain a permanently installed stainless steel 2µ frit, and are recommended for applications where contaminants are the exception and not the rule - that is, when the sample is generally clean but you wish to guard against the stray burr from a carelessly prepared tube end that might find its way into the flowpath.
Bulkhead versions are designed to be mounted through an instrument panel or on a bracket. The filter body is undercut so that it bites into the panel when the mounting nut is tightened, eliminating the need for a lock washer.
Standard material is Type 316 stainless.
Standard Pressed Frit Filters
| Description | Bore | Product No. |
|---|---|---|
| 1/16 to 1/32" | 0.25 mm | ZRUF1.5 |
| 1/16 to 1/16" | 0.75 mm | ZUF1 |
| 1/8 to 1/16" | 0.75 mm | ZRUF21 |
| 1/8 to 1/8" | 0.75 mm | ZUF2 |
Bulkhead Pressed Frit Filters
| Description | Bore | Product No. |
|---|---|---|
| 1/16 to 1/32" | 0.25 mm | ZBRUF1.5 |
| 1/16 to 1/16" | 0.75 mm | ZBUF1 |
| 1/8 to 1/16" | 0.75 mm | ZBRUF21 |
| 1/8 to 1/8" | 0.75 mm | ZBUF2 |
