home product info customer service search

home



new products









Search for a replacement part

A new feature of our web site allows you to enter an instrument manufacturer's part number for a replacement part and retrieve the equivalent Valco part number, a full description, and links to the pages where the product can be found.
Find a replacement part.

360 µm fittings and tubing

Our new high pressure fitting design permits direct connection of 360 micron OD fused silica, PEEK, stainless, or electroformed nickel tubing without the use of liners.
For more information, email us or call (800) 367-8424.
More about 360 µm fittings.
More about 360 µm tubing.
PEEK
EFNi

20,000 psi UHPLC injector and column selector

Now available with 360 µm fittings!
The C72 series injectors and C75 series column selectors from Cheminert feature a proprietary stator coating that permits use to 20,000 psi. Models are also available rated at 10 and 15 kpsi. The devices use the same mounting system as the widely-used Cheminert C2 and C5 series HPLC injectors and column selectors.
For more information, email us or call (800) 367-8424.
More about the Model C72 injector.
More about the Model C75 column selector.

Injector or stream selector with integrated motor/controller

For OEM applications only
A Cheminert HPLC injector or stream selector integrated with a 24 volt motor from our popular microelectric actuators, the compact C52 (injector) or C55 (selector) needs only to be connected to the instrument's power supply. Available in 4, 6, 8, and 10 port configurations, stainless or PAEK.
For more information, email us or call (800) 367-8424.
More about the Model C52 injector.
More about the Model C55 stream selector.

Dual-Layer Color-Coded PEEK® tubing

Sample contamination by color pigments is not a concern with this tubing, since the pigmented layer surrounds a separate inner layer of natural PEEK. 1/16" OD tubing is available in standard IDs and colors, and in OEM quantities with any color or ID specified, from .002" on up. Call us about any custom tubing needs you have.
For more information, email us or call (800) 367-8424.
More about Dual Layer PEEK tubing.

Dynacalibrator® Model 150

Dynacalibrator calibration gas generators are used to verify the accuracy of analytical data from air pollution monitoring, industrial hygiene surveys, odor surveys, and other instruments measuring gas concentrations. Our new model controls the chamber temperature to ±0.01°C, measures only 6" wide x 15" deep x 7" high, and weighs just 10.5 pounds.
For more information, email VICI Metronics or call (877) 737-1887.
More about the Model 150.

No twist one piece fittings

The no twist design has a separate ferrule that snaps into the nut, so it's attached but still free to avoid rotation during tightening. In other one-piece designs, the ferrule rotates against the fitting detail, creating particulates.
For more information, email us or call (800) 367-8424.
More about No twist one piece nut/ferrules.

Reduced breakdown injection port liners

DDT and endrin are easily degraded in the injection port. In EPA methods SW-846, if degradation of either DDT or endrin exceeds 20% or the combined breakdown of DDT and endrin is greater than 20%, corrective action must be taken before proceeding with calibration. Our first users report that the RBL liner is still exhibiting less than 2% endrin breakdown after two months of use!
For more information, email us or call (888) 217-7199.
More about reduced breakdown injection port liners.


Home | Products | Customer service | Contact | About VICI | Site map | Site index

VICI® is a registered trademark of Valco Instruments Co. Inc. and VICI AG
© 2008 VICI